Error code -43?
Error code -43?
Hey,
I keep getting an error code -43 and I worked out that it has to do with a converted soundfont file in EXS. I tried removing EXS convert and converting the SF file again but that doesn't work. I booted my old OS and the EXS file loaded fine.
Any suggestions on how to have it load in new OS?
Many thanks in advance..
K
I keep getting an error code -43 and I worked out that it has to do with a converted soundfont file in EXS. I tried removing EXS convert and converting the SF file again but that doesn't work. I booted my old OS and the EXS file loaded fine.
Any suggestions on how to have it load in new OS?
Many thanks in advance..
K
G5 Dual 2ghz.-4gb RAM-Unitor 8-O1X-Mackie Big Cock-Event & NS10 monitors-Formac Displays-Korg Z1 & Micro-Tascam recorders-Beyer cans-Logic 7-Spectrasonics-VSL-NI-Yellow Tools-Audioease-PSP-Propellerheads-Toontrack-Linplug-Novation-Guitars-Celemony
-
- Posts: 2623
- Joined: 15 Jan 2004, 16:52
If you know which file is causing it, check the actual file and make sure permissions are set correctly. (you should check the permissions on the enclosing directory too.) Also make sure there are no illegal characters in the file name.
(perhaps the file, or the directory, is owned by the user in the old OS you booted into ?)
(perhaps the file, or the directory, is owned by the user in the old OS you booted into ?)
Thanks so much chaps..
Yeah.. It could be my old OS user (me) How do I go about changing this?
K
Yeah.. It could be my old OS user (me) How do I go about changing this?
K
G5 Dual 2ghz.-4gb RAM-Unitor 8-O1X-Mackie Big Cock-Event & NS10 monitors-Formac Displays-Korg Z1 & Micro-Tascam recorders-Beyer cans-Logic 7-Spectrasonics-VSL-NI-Yellow Tools-Audioease-PSP-Propellerheads-Toontrack-Linplug-Novation-Guitars-Celemony
Re: Error code -43?
What is error code 43? That is the question.!!kabb wrote:Hey,
I keep getting an error code -43 and I worked out that it has to do with a converted soundfont file in EXS. I tried removing EXS convert and converting the SF file again but that doesn't work. I booted my old OS and the EXS file loaded fine.
Any suggestions on how to have it load in new OS?
Many thanks in advance..
K
MacPro 2x3 dual core 26GB ram, 30 terabytes eSata hard drive storage, MetricHalo audio interfaces,
BlueSky 5.1 monitoring & some quality outboard Mic Pres & signal processors.
BlueSky 5.1 monitoring & some quality outboard Mic Pres & signal processors.
- G
- Owner/Admin
- Posts: 2150
- Joined: 05 May 2003, 18:11
- Twitter: glenngutierrez
- Location: SF Bay Area, California
- Contact:
Re: Error code -43?
Target not found. It can be a file or a folder that's missing, or just not where it was expected to be.LennieJ wrote:What is error code 43? That is the question.!!
Mac Studio (M2 Ultra) . UA Apollo x6 + Quad . Logic Pro . Acoustica . PS CC . Affinity Suite . Get Info
Well, if you can find the file, select it and 'get info' (command+I) and look at the ownership & permissions details.kabb wrote:Thanks so much chaps..
Yeah.. It could be my old OS user (me) How do I go about changing this?
K
You may be able to change ownership there, but it would be better to move the file(s) to a non-boot drive which can be set to 'ignore ownership' (This setting is in the Info window for the drive.)
Result code = -43
Still having no luck I've located the files. They're old soundfont files of some vocals I cut up in recycle - converted to soundfont - then into EXS. I've tried to change the owership to read and write but it doesn't seem to change anything. (They were on read only) I do have the files in a few locations.. One on my old OS drive etc.
I'll try to set my drive to 'ignore ownership' now.
Thanks for the help so far..
K
Still having no luck I've located the files. They're old soundfont files of some vocals I cut up in recycle - converted to soundfont - then into EXS. I've tried to change the owership to read and write but it doesn't seem to change anything. (They were on read only) I do have the files in a few locations.. One on my old OS drive etc.
I'll try to set my drive to 'ignore ownership' now.
Thanks for the help so far..
K
G5 Dual 2ghz.-4gb RAM-Unitor 8-O1X-Mackie Big Cock-Event & NS10 monitors-Formac Displays-Korg Z1 & Micro-Tascam recorders-Beyer cans-Logic 7-Spectrasonics-VSL-NI-Yellow Tools-Audioease-PSP-Propellerheads-Toontrack-Linplug-Novation-Guitars-Celemony
nope.. That didn't work either
Should i (Can i) change my main drive to 'ignore ownership'?
K
Should i (Can i) change my main drive to 'ignore ownership'?
K
G5 Dual 2ghz.-4gb RAM-Unitor 8-O1X-Mackie Big Cock-Event & NS10 monitors-Formac Displays-Korg Z1 & Micro-Tascam recorders-Beyer cans-Logic 7-Spectrasonics-VSL-NI-Yellow Tools-Audioease-PSP-Propellerheads-Toontrack-Linplug-Novation-Guitars-Celemony
Still no luck with this dilema
Any more suggestions?
K
Any more suggestions?
K
G5 Dual 2ghz.-4gb RAM-Unitor 8-O1X-Mackie Big Cock-Event & NS10 monitors-Formac Displays-Korg Z1 & Micro-Tascam recorders-Beyer cans-Logic 7-Spectrasonics-VSL-NI-Yellow Tools-Audioease-PSP-Propellerheads-Toontrack-Linplug-Novation-Guitars-Celemony