Mac OS X 10.10 Yosemite compatibility

[G]

Zoom

https://www.zoom-na.com/news/zoom-tac-2 ... ite-update

With the new system update, there has been a confirmed “glitch” noise when using the TAC-2 device. We have immediately begun working to resolve the issue. In the meantime, those using the TAC-2 may want to wait on making the system update until the issue has been resolved.

Update: A new TAC-2 / TAC-2R Driver for Mac v2.0.5 (OS X Yosemite) is now available.

[G]

Propellerhead

https://www.propellerheads.se/support/n ... statement/

Initial testing of the new Mac OS X Yosemite has not revealed any problems with the latest versions of Reason (version 7.1.1 and 8), Reason Essentials (version 2.1.1 and 8), ReCycle (version 2.2.4) or the Balance audio interface. Please note: your music making system does not consist of Propellerhead products alone. Please make sure that all your hardware (audio interfaces, controllers etc) is compatible.

[G]

Universal Audio

http://www.uaudio.com/support/uad/compatibility#osx

Initial tests of OS X Yosemite and UAD software have detected no major issues. However, this testing has not been comprehensive and there may be other issues to consider before upgrading to OS X Yosemite in the near future.

Known Issues: Some relatively minor graphics issues with UAD software have been reported. These issues generally don’t prohibit use of the software and will be addressed in a UAD future release.

[G]

Gobbler

https://www.gobbler.com/announcing-full ... -yosemite/

Upgrading to the new OS X Yosemite? Gobbler’s got your back – the Gobbler Helper Apps for Gobbler 1.0 and Gobbler 2.0 both work with the new Yosemite operating system. Make sure to check compatibility with all your DAWs and plugins before updating, though!

[G]

Celemony

http://www.celemony.com/en/news/yosemite

Our tests have shown that Melodyne editor, assistant, essential and also Melodyne studio 3 run without any problem on the new operating system. If you use Melodyne as a plugin, please check whether your DAW is already compatible with Yosemite before updating to the new system.

[Stian]

I cannot get my Emagic MT4 interface for MIDI (to my Roland FP3) to work after upgrading to Yosemite. Worked fine under Mavericks. Audio MIDI Setup simply can't find it. Anyone with ideas?

[G]

I cannot get my Emagic MT4 interface for MIDI (to my Roland FP3) to work after upgrading to Yosemite. Worked fine under Mavericks. Audio MIDI Setup simply can't find it. Anyone with ideas?

From which version of OS X did you upgrade? And it's been a long time since I've seen an MT4--does it require a driver in OS X? Have you tried this tip to run Software Update with the MT4 connected?

[G]

TAL

http://kunz.corrupt.ch/home

We have updated TAL-BassLine-101, TAL-U-NO-LX-V2 and TAL-Chorus-LX. This update fixes a OSX 10.10 Yosemite compatibility issue with the VST 32bit version of the plug-in's.

Some of the free VST 32 bit plug-ins are not compatible with OSX 10.10 Yosemite. We added a note near the download link of the affected plug-in's.

[bakerja]

M-audio firewire series problems with Yosemite. Some have reported the device will not work at all, but my projectmix i/o works. The M-audio control panel will not work for any m-audio firewire series device.

I can still use protools but I am stuck in the current mode. I can't change anything on the device.

[G]

Slate Digital

(via email)

They have verified that there are plug-in GUI issues when running a DAW in 32-bit mode. Slate's FG-X is currently only available as a 32-bit AU/VST. The 64-bit update for FG-X should be available by the end of the year.

Update, 25 Feburary 2015 (via Twitter):

FG-X & VCC are now both in 64bit AAX, AU, and VST.

[pangmaster]

I cannot get my Emagic MT4 interface for MIDI (to my Roland FP3) to work after upgrading to Yosemite. Worked fine under Mavericks. Audio MIDI Setup simply can't find it. Anyone with ideas?

From which version of OS X did you upgrade? And it's been a long time since I've seen an MT4--does it require a driver in OS X? Have you tried this tip to run Software Update with the MT4 connected?

I can confirm that an Emagic Unitor 8 mkII still works fine in Yosemite. The USB driver should be the same for an MT4. I have version 2.5, which I believe is the latest version (unless a newer one was shipped with Logic X... I'm still on 9).

It can be found at /Library/Audio/MIDI Drivers/EmagicUSBMIDIDriver.plugin

http://support.apple.com/kb/dl991

[G]

Harrison Consoles

(via email)

Mixbus is compatible with OS X Yosemite. Working great!

[sdaino]

DSP-Quattro 4.2.4

DSP-Quattro 4.2.4 is fully compatible with MacOS X 10.10 Yosemite.

Stefano Daino
http://www.dsp-quattro.com

[G]

Now that Slate has released 64-bit versions of FG-X and VCC, is there anything remaining that is definitely not compatible with OS X Yosemite?